Dinan Stage 1 Performance Engine Software For GX BMW N63 (TU3) 

Even though a step below the S63TU4 and the immense power that that M engine wields, the N63TU3 still shares much of the same V8 architecture and is plenty capable of feats most powerplants can only imagine. Paired with a Dinan Stage 1 calibration yielding max gains on pump gas of nearly +110 WHP and +140 lb-ft of torque, the N63TU3 and the M550i/M850i it powers, instantly evens the playing field and puts the platforms on level footing with the alphas of the brand. The imposing gains are eye-opening on their own but considering that those figures are with no additional modifications or alterations to the catalysts, it's an even more impressive achievement. One that will be sure to result in a very enthusiastic grin. Utilize race gas or E85 and the gains jump yet another factor of fun -- a mind boggling +207 WHP and +205 lb-ft of torque to be exact.  

While increases in power at this scale typically come at a cost to the engine's durability, this is typically due to improper calibrations that are simply after one goal regardless of engine health - maximum power. Dinan's calibrations are safe and reliable without sacrificing long-term reliability or performance. Dinan performance engine software is so much more than just turning up the turbo boost after all. It is a fully re-tuned engine management program that maximizes power while keeping all the BMW factory safeguards in place. In most cases Dinan software engineers also implement their own additional safety precautions in order to guarantee flawless performance that may not have been needed with factory power levels/programming. Protecting your BMW, while giving the most performance, is the definition of "Performance Without Sacrifice". To do just that, drivetrain and engine components are analyzed for strength, and then the calibration is tested on the dyno and in the real world for durability and drivability. This process has been a cornerstone of Dinan software development for decades and a major reason why Dinan performance tunes are often labelled as being the smoothest, factory-like solution in the marketplace.

Features:

• More Power: Max gains ranging from 108 WHP / 141 lb-ft of torque over stock with 93 octane and 207 WHP / 205 lb-ft of torque on E85 - Consult the performance charts for additional octanes and/or detailed data on specific vehicle variants
• Dinan Stage 1 performance software includes a limited lifetime warranty against defects in the software and provides free updates and reflashes as they become available (Labor or shipping charges are not included in the warranty)
• Choice of numerous octane calibrations depending on your needs (91, 93, 100, 104 & E85)
• No required parts - install on a stock car and receive the full power gains
• Full map rescaling for drivability from idle to wide open throttle and everywhere in between
• Optimized boost control, cam phasing, lambda targeting, fueling, airflow and temperature controls for maximum power output that is also safe and reliable
• Retains all BMW factory engine safeguards and adds numerous additional safety protections
• Top speed governor (VMAX) removed
• Torque by gear strategies implemented for maximum power output and traction
• Sport mode cooling that targets lower coolant temperatures added for optimum track effectiveness
• Pedal feel improved to naturally align with the increased torque output
• Sport gauges rescaled to reflect higher than stock power output
• Torque reserve feature enabled for increased boost pressure during launch control

DME UNLOCK & FLASH NOTICE / HOW TO PURCHASE

2020 MY and prior in the case of the M850i (specifically up to a 06/2020 build date) N63(TU3) DME's must be unlocked and bench flashed by Dinan. 2021 MY vehicles are not supported at this time. While dealer / retail unlock and flashing tools are in development, at present, two options are available:

OPTION 1:

Visit a Dinan Dealer and purchase the Dinan Flash Software . They will remove and mail the DME's to Dinan. We'll unlock the DME's, flash the software and ship them back. They'll reinstall the DME's.

OPTION 2:

Purchase the tune. Send us your DME's (label each appropriately). We’ll unlock it, install Dinan software, and ship them back. The unlock process is free. Ground shipping to the continental USA is free. Follow the steps below if this is the course you wish to pursue.

1. Purchase the tune by contacting Dinan via phone at 1-800-341-5480.
2. Fill out the unlock form and select BMW under the unlock type.
3. Mail your labelled DME's to Dinan, 4800 U.S. Hwy 280 W, Opelika, AL 36801, USA, and include the last 7 of your VIN on the outside of the box along with a copy of the unlock form inside the box.

At no time during the unlocking process are the DME's opened or physically modified. Once unlocked the DME's can be flashed through normal dealer tools. If the DME's are flashed back to stock, it will need to be unlocked again. Also, vehicle manufacturers issue many DME part numbers and revisions throughout their vehicle lineup. As such, some DMEs may be temporarily unavailable as new parts and/or revisions are released.

CODE CLEARING

Customers doing the DME removal/install process themselves should be aware that in the case a fault code occurs, having the ability to read and erase fault codes is crucial. Failure to be able to perform this task may result in a vehicle that is inoperable. Dinan will not cover any expenses related to not being able to clear codes (towing, equipment rental, etc.).

COMPATIBILITY NOTICE

BOX CODES: The N63(TU3) engine accounts for numerous unique box codes across various platforms. While Dinan has created files for many of these permutations, there is a chance you may have a box code that we have not seen. If this happens to be the case we will need to create a file for your vehicle. This process could add up to 7 days to the bench flash process although in most cases it will be turned around within 2 business days.