Racingline Upgraded Boost Pipe Kit For VW/Audi MQB 'Evo' 2.0T (Garrett Turbo)

This 3-piece RacingLine GEN.4 Boost Pipe kit for 2.0TSI EA888.4 lower-output Garrett turbo MQB 'Evo' cars such as Golf mk8 GTI delivers smooth, uninterrupted airflow to increase power and torque, replacing the restrictive failure-prone factory boost pipes. By promoting increased airflow throughout the charge flow path, along with removing boost-leak weak points, performance and reliability gains are guaranteed!

The RacingLine Boost Pipe kit for 2.0 TSI gen.4 245-265 PS engines in MQB "evo' vehicles delivers smooth, uninterrupted airflow to increase power and torque, replacing the restrictive, failure-prone factory boost pipes on all EA888 gen.4 'lower output' Garrett turbo cars.

The 3-piece Boost Pipe Kit replaces the factory pipework between the turbocharger, the intercooler, and the throttle body with one-piece, mandrel-bent 6000 series aluminium tubes with thin wall 60mm OD for maximum smooth air flow.

It’s by minimising the restrictions of the factory pipes and optimising the routing that this increased airflow is achieved. As well as giving enhanced turbocharger sound and faster spool, fitment of these Boost Pipes also ensures that the turbo meets less resistance thus allowing it to perform more effectively - moving a larger volume of air and minimising turbulence.

This RacingLine Boost Pipe Kit comprises three separate pieces. Two mandrel-bent hard-pipes for the turbo-intercooler and intercooler-throttle body chargepath, plus a reinforced turbo outlet Silicone Hose for the turbo outlet.

The Boost Pipes themselves are formed from single piece, mandrel-bent 6000 series aluminium tube with thin wall 60mm OD. The silicone hose is hand-wound multi-ply over internal wire reinforcement, ensuring resistance to both heat and deformation. Meanwhile, barbed ends on the pipes ensure no risk of blow off, even under extreme boost pressure conditions.

As you’d expect from RacingLine, each pipe is hand polished then anodised black with laser etched logos as the finishing touch - to look great in your engine bay, and stay looking great.

As with all RacingLine products, perfect fitment is a priority. So, all the mounting brackets are carefully TIG welded to ensure dimensional perfection. And within each kit, RacingLine include a stainless steel Mikalor-brand clamp, OEM rubber mounting bobbins and new bolts to make sure you achieve the perfect installation. Install is direct OEM-replacement and requires no additional drilling or cutting to fit - meaning install is simple, and fully reversible.

Finally, the Boost Pipes can be used with either factory rubber hoses or, for best results we'd highly recommend pairing them with the RacingLine Gen.4 Boost Hose Kit (VWR140006)

APPLICATIONS: 

2.0 TSI / EA888 Gen.4 engines - Garrett Turbo 245-265PS

• VW Golf 8 & 8.5 GTI 2020+
• VW Tiguan II 2.0 TSI 245ps 2021+
• Audi A3 2.0 TSI 8Y & 8Y.2 2020+
• Audi TTS 2.0 TFSI 8S 320ps (EA888.4) 2021+
• Cupra Leon 4 & 4.5 245 TSI FW 2020+
• Cupra Formentor 245ps 2020+
• SEAT Tarraco 2.0 TSI 245ps 2021+
• Skoda Octavia 4 & 4.5 vRS 2.0 TSI 245ps NX 2020+
• Skoda Kodiaq vRS 2.0 TSI 245ps (EA888.4) 2021+