P3 Gauge For E8X BMW 1 Series - Orange (LHD)

Custom built multi-function digital boost gauge and more for the E81, E82, E87, and E88 generation (2004-2013) BMW 1 Series, including 116i, 118i, 120i, 125i, 130i, 135i, 1 Series M Coupe (1M), 116d, 118d, 120d, and 123d models, as well as all xDrive variants.

Form and Function

Every P3 Gauge is built just for your car. It fits perfectly - like it was born there.Stealthy. Stylish. Smart.

In one sleek display you get real-time access to everything that matters - Boost, Engine Temps, Performance Timers, Code Reading/Clearing, and more. All that from the included diagnostics port connection or optional add-on sensors.

It’s easy to install, simple to use, and made to last.

Every unit is built to order, hand-assembled, and developed entirely in-house... not by a huge corporation but by a small team who loves cars as much as you do.

Optional OEM Vent Install Service:

P3 purchase an OEM Vent from the manufacturer of your vehicle, and pre-install the P3 Gauge to save you time and make the install or removal of the gauge be possible in a few minutes. 

P3 Gauge OEM Vent Install Service For E8X BMW 1 Series

Gauge Modes / Readings

We designed the P3 Gauge to read the most important data from your specific vehicle for easy plug and play install. You'll get everything you need with a single OBD port connection to be up and running in minutes. If you wish to add additional sensors, or not use OBD at all, advanced tuners can use analog inputs or even run in "analog only" mode.

OBD Port Data (CANbus input):

• Boost Pressure
• Coolant Temp
• Air/Fuel Ratio (AFR or Lambda)
• Vehicle Speed (Calibrated or Raw)
• Intake Air Temp
• Throttle Angle
• Ignition Timing
• Engine RPM (with shiftlight)
• EGT (Exhaust Gas Temp)
• Battery Volts
• Acceleration timers (0-60, 0-100, 60-130)
• Braking timers (60-0, 100-0)
• Read and clear DTC (Trouble Codes)

Optional Analog Inputs:

Optional but powerful. The analog inputs on the P3 Gauge allow you to use up 3 extra sensors to read data. In addition, it also provides a 4th input for auto-dimming display capability.

• Analog Boost Input: Use the P3 Analog Boost Sensor to read up to 80psi boost for advanced tuners and cars with aftermarket forced induction kits.
• 2x Universal 0-5v Inputs: Two individual 0-5 volt universal analog inputs with flexible configuration allow for near infinite possibilities and customization.
• Dimmer Voltage Detection Input: Configure the gauge to d.On.A mode and anything over 1 volt tells the gauge to dim, perfect for easy tapping into existing interior lighting.