IE ECU Performance Engine Tune For VW MK6 Golf R / 8J Audi TTS 2.0 FSI K04

Please Note: IE PowerLINK V4 Flash Cable must be purchased separately. The cable can be purchased here

Inject some adrenaline and excitement into your right foot by adding serious power to your VW NK6 Golf R or Audi 8J TTS. In only minutes from your laptop, you can unleash your engine's performance Get ready to blow away the competition and transform your peppy 2.0T into a powerhouse monster!

IE's motorsport-inspired software completely retunes the ECU calibration on your 2.0T FSI (EA113) factory K04 turbo engine while retaining factory comfort and reliability. using industry-leading tuning technology and decades of race engine tuning experience, IE engineers completely reverse engineer the factory mapping and customize it to maximize performance for the enthusiast driver for the street and track. Your new software tune can be easily uploaded to your factory-installed ECU (engine control module) without touching a wrench in your own driveway. Multiple tunes are available to match your stock or installed aftermarket hardware.

STAGE 1

The IE Stage 1 Golf R / TTS tune delivers an aggressive power upgrade without installing any hardware modifications. It is perfect for customers looking for a big jump in power without adding any additional hardware. In a matter of minutes, the vehicle will be much more enjoyable to drive with a massive boost in performance. The tune includes octane switching between 91 and 93 octanes.

Stage 1 recommended hardware

• IE Cold Air Intake (For highest power output)
• IE Intercooler (For highest performance)

 

STAGE 2

For customers looking to maximize the stock engine's performance and turbo with full bolt-on hardware, IE Stage 2 software fine-tunes the ECU calibration to match installed aftermarket high-flow downpipes.  Stage 2 results deliver massive power gains across the powerband, fully realizing the engine and stock turbocharger potential. Includes 91, 93, and 100 octane switching.

Stage 2 required & recommended hardware

• Performance Downpipe (required)
• IE High-Pressure Fuel Pump Upgrade (required)
• IE DSG Transmission tune (required for TTS)
• IE Cold Air Intake (recommended)
• IE Intercooler (highly recommended)
• Performance clutch upgrade (highly recommended)
• Note: A non-factory downpipe will trigger a Check Engine Light. 

 

STAGE 2 PRO

Pro features further enhance Stage 2 performance by including the motorsport functions of launch control and no-lift shift. These features are built into the software tune and offer neck-breaking launches and lightning-fast shifting with no loss of boost between gears, providing a large advantage over similarly powered vehicles. It also includes 91, 93, and 100 octane switching.  

Note: Stage 2 Pro is not available for TTS.

Stage 2 Pro required & recommended hardware

• -Performance Downpipe (required)
• -IE High Pressure Fuel Pump Upgrade (required)
• -Performance clutch upgrade (required)
• -IE Cold Air Intake (recommended)
• -IE Intercooler (highly recommended)

 

OPTIONAL FEATURES

IE STAGE 2 LIGHT

IE Stage 2 light is for customers who have installed a downpipe required for Stage 2 but have yet to install an IE High-Pressure Fuel Pump (HPFP). Installing a performance downpipe while running a stock or Stage 1 ECU tune can result in over-boost conditions, check engine lights, or "Limp Mode". Stage 2 light will increase power levels taking advantage of the downpipe change while keeping safe fuel operating conditions. This will increase power greatly over Stage 1, but not to our full Stage 2 High Torque file. Stage 2 light is included when purchasing a Stage 2 file; once an upgraded HPFP is added, the user may upgrade to IE Stage 2 at no additional cost.

STAGE 2 INTAKE MANIFOLD (IM) PRO

Stage 2 Intake Manifold Tune for your MK6 Golf R or Audi TTS is designed for customers looking to maximize the factory engine's and turbocharger's performance with an IE 2.0T Performance Intake Manifold (Sold Separately). IE Stage 2 Intake Manifold software fine-tunes the ECU calibration to match the manifold plenum and runner flow characteristics and includes special tuning for the removed runner flaps. This file also includes launch control and no-lift shift. Stage 2 IM Pro is an included upgrade with your purchase of a Stage 2 Pro Tune at no extra cost.

ECU Tune Features:

• Maximize horsepower & torque gains
• Easily and quickly tune your car at home
• Retain factory reliability
• No-lift-shift & launch control (pro features)
• Installs via IE POWERlink Tool
• Upgrade tunes at any time with no fees
• Easy octane switching
• Simple data logging
• Return to stock anytime
• Improved throttle response
• Increased rev limiter
• Remove top speed limiter