BMS Competition Cold Air Intake For BMW M240i/M340i/M440i B58 (For Pure 900 Turbo)

For Gen 2 B58 powered vehicles equipped with the Pure 900 turbo.  
Introducing the Burger Motorsports Competition Cold Air Intake for the Gen 2 B58 powered 2019-2024 BMW M340i, 2022-2024 M440i, and 2022+ M240i equipped with an upgraded Pure 900 turbocharger. 

Designed from the ground up to be the best in every aspect with over a year invested in street and track testing. This is the first intake for the Gen 2 B58 that follows a clean OEM+ look and materials but has the intoxicating sound and performance of an open intake. Inside, you'll find our proprietary renewable inverted cone performance filter; outside, you'll find unsurpassed OEM fitment, materials, and quality. The BMS competition intake has a clear window on top for quick filter inspection, uses the OEM cold air inlet, and has a huge inlet hole on the cold side of the airbox for more cold air for your Pure 900 turbo and fantastic sound! The factory heat shield is reused to keep those intake temps as low as the factory intended. The rubber accordion hose and factory resonator are replaced with a huge smooth 4" pipe to the Pure 900 turbo. This intake keeps IATs as low as possible while maximizing airflow to your Pure 900 Turbo. 

Our Burger Motorsports renewable inverted cone filters include a built-in velocity stack. Velocity stacks allow even more air to be smoothly sucked into your intake system and are used in most racing applications. 

ATTENTION: Requires slight trimming of the factory intake heat shield to clear the large 4" tube when used with the BMS Competition Intake airbox.

Features

• Enclosed intake system for Pure 900 turbos
• 4" Intake tube
• Retains OEM heat shield for low IATs
• Retains OEM cold air ducting
• Looks great under the hood
• Renewable inverted cone air filter

What's included?

• (1) Airbox lid with clear window
• (5) Stainless Steel button head M6 x 1mm thread, 10mm long hex drive airbox lid screws 
• (4) Stainless Steel button head M6 x 1mm thread, 10mm long hex drive heat shield screws
• (2) Stainless steel M4 x 0.7mm Thread, 8mm Long MAF sensor screws
• (1) Modified High flow airbox bottom
• (1) 4" Blue Inverted cone BMS renewable performance filter 
• (1) 4" High flow intake tube
• (1) 4" Custom 90º silicone coupler
• (2) 4" heavy-duty 90-110 hose clamps
• (1) 12.25" piece of rubber weather stripping

Gen 2 B58 Vehicle Fitment (Pure 900 Turbo)

BMW 2 Series
• 2022+ G42 Gen 2 B58 BMW M240i and M240i xDrive

BMW 3 Series
• 2019-2024 G20 G21 Gen 2 B58 BMW M340i and M340i xDrive

BMW 4 Series
• 2021-2024 G22 G23 G26 Gen 2 B58 BMW M440i and M440i xDrive including Gran Coupe