This is a Race-only product. An electronically signed Race-only Product Acknowledgement Agreement is required prior to shipping out. The use or installation of this product outside of the intended closed circuit racing purpose may be illegal under the Federal Clean Air Act (42 U.S.C. § 7522(A)(3)). Instructions for the waiver will follow after checkout.
Our exhausts have earned praise from owners and the press alike, due to their unique "Jekyll and Hyde" personality. We spend considerable time and effort during development to achieve remarkable civility when idling and crusing at part throttle, while also producing a war-cry wail when full throttle is applied. Sophisticated, refined, and powerful, all at once.
We spent considerable time examining how to maximize the performance and options of this exhaust system. The factory exhaust consists of a long downpipe with two catalytic converters, and two rather large mufflers in the section after the cats.
Thorough long term street testing has confirmed that our high flow downpipe, whether equipped with with the 400 cell ceramic catalytic converter (for FSI) or the 200 cell metal catalytic converter (for both FSI and TSI), will not set a Check Engine light or any fault codes in the ECU. For FSI customers looking for ultimate power, our HJS German made metal catalytic converter will provide over our ceramic converter option.
Here are some features of our system. Each feature was chosen for performance and longevity reasons, and when making your exhaust decisions you should settle for nothing less:
The catback system is topped off with our signature 3.15" beveled exhaust tips. The tips sport stamped AWE Tuning logos and are double walled to ensure a mirror polish even under hard usage. The system has multiple slip joints with high quality stainless band clamps, to allow optimal adjustment.
Our catback systems will mate up to the stock downpipe, and our downpipe will mate to our catback or any other catback that is designed to mate up to the factory downpipe.
Why did we choose 2.5 inch and not 3.0 inch diameter for our MK5 exhaust? Our first prototypes of this system were indeed 3.0 inch, but we found that the effort it took to move the large mass of air in the 3.0 inch system at lower rpms resulted in a loss of torque with very little offsetting gain up top. Take a look at our 3.0 inch prototype dyno sheets and see why a 3.0 inch system is not appropriate for this car.
Please note, the AWE Tuning Track Edition Downpipes are for offroad use only.
*** The item above, if not in stock, is build-to-order and may require additional shipping and handling time. If it is not designated as "IN-STOCK" above, then please call for an accurate ETA. Or, you may place your order and you will receive an ETA shortly thereafter.