Home » Engine » Accessories » Spulen Ultimate Brake Vacuum Pump Delete Kit For 2.5L
Product description
Spulen Ultimate 2.5L Brake Vacuum Pump Delete Kit
 
The braking system on your vehicle requires a constant vacuum to assist in applying the brakes. Traditionally this vacuum is achieved by plumbing the brake booster to the engine’s intake manifold. This provides the needed vacuum to assist in applying the brakes.
 
However, vehicles equipped with the 2.5L engine do not receive vacuum from the intake manifold. Instead, the 2.5L engine is equipped with an external vacuum pump to provide the necessary vacuum. The vacuum pump design has numerous disadvantages including decreased power output from increased parasitic engine drag, the pumps oil seals are prone to failure and cause significant oil leaks, and a replacement pump cost upwards of $350 for parts and around $1100 if replaced at the dealership. 
 
The Spulen Ultimate Brake Vacuum Pump Delete Kit addresses all of these disadvantages. The Spulen kit eliminates the factory pump using a block off plate with a high-temperature resistant o-ring. The brake booster is then plumbed to the intake manifold using custom silicone hoses. As an added benefit the included silicone hose replaces the factory plastic PCV hose which is prone to cracking.
 
What is the Ultimate Kit? 
Spulen has created this intricate and unique system that solves a problem that occurs on most 2.5L after a certain mileage. Our kit was first launched as a significantly cheaper alternative to a vacuum pump replacement. The Ultimate kit uses a high chemical and temperature resistant O-ring along with cooling fins on the plate for a superior and complete kit. The O-ring replaces the gasket used on the previous version of the kit (SE-095). The cooling fins on the plate are also a Spulen exclusive for heat dispersion. The O-ring has been extensively tested through harsh and extreme environments to ensure a proper and durable seal. This kit also comes with Stainless steel, fully threaded socket head screw with a tensile strength of 70,000 psi. A 5mm Hex key required to install the (3) screws is also included, along with a pair of latex gloves. We have also replaced the old plastic barbed fitting with temperature resistant stainless steel barbed fitting. 
 
Complete installation instructions are available below and each kit includes all necessary hardware to eliminate the factory brake vacuum pump.
 
Replaces OEM part# 07K 145 100H
 
Features
  • Complete Vacuum Pump Delete Kit
  • Includes new re-designed block off plate and O-ring
  • Removes leaking vacuum pump
  • Includes all needed hardware and silicone hoses
 
Product video

Customer feedback

Frank R Sokolow
Nov 16, 2018
Easy Install & works great! On a manual transmission you can skip steps 11-15 in the instructions. Which means you don't have to take off of the shift selector, or take apart the vacuum pump.

Advantages: Noticeably quieter at idle, Easy Install, brakes feel the same. No more oil leak.

Disadvantages: none
Loading...Was the above review useful to you? Yes (7) / No (0)
David Millunchick
Jan 27, 2019
Worked perfectly, I installed it on a 2007 Beetle. Definitely takes longer on a beetle than the jetta that is used in the youtube videos. Take your time, I had to remove the sire box, battery, battery tray, intake. Throttle body you can loosen up but can't move very far due to coolant lines. (good time to clean it)

Advantages: braking felt great after and it stopped the oil leak. Easy to install. Be sure to clean and dry all surfaces prior to install!

Disadvantages: Tricky to get old pump out, just take your time. Engine plastic cover on the beetle won't fit after the kit is installed. Only Real negative.
Loading...Was the above review useful to you? Yes (1) / No (0)

Send to friend

: *
: *
: *
 
Select Your Vehicle
3.00# 11.00x7.00x3.00

Spulen Ultimate Brake Vacuum Pump Delete Kit For 2.5L

Cooling Fins Plate Kit to Eliminate that Vacuum Pump Leak
 
 
(2 reviews)

Read Full Description
On Sale Save 25%
Brand: 
$159.99 $119.99
MFG# SE-097
SKU# 20191
 In Stock 
This item is in stock and will usually ship same day if ordered by 4PM EST.
Free shipping
QTY:

  • Full description
  • Cars This Fits ...

  • Make Model Year Engine
    Volkswagen Passat B7 (2012-2015) 2.5L
    Volkswagen Jetta MK5 (05.5-2010) 2.5L
    Volkswagen Jetta MK6 Sedan (2011-2014) 2.5L
    Volkswagen Jetta MK6 Sportwagen (2010-2014) 2.5L
    Volkswagen Golf/GTI/Rabbit MK5 (06-2009) 2.5L
    Volkswagen Golf/GTI/Rabbit MK6 (10-2014) 2.5L
    Volkswagen Beetle Beetle (2012+) 2.5L
    Volkswagen Beetle New Beetle (98-2011) 2.5L