Home » Engine » Cooling » Racingline VWR Oil Cooler Kit For VW & Audi MQB Platform
Product description

Racingline VWR Oil Cooler Kit For Volkswagen & Audi MQB Applications

Racingline's much-anticipated Oil Cooler Kit is an essential fit for any hard-driven MQB 2.0 TSI car running high power levels or in hot climates. It's a complete ready to install package, using a clever sandwich plate design for straightforward and reliable installation.

Adding power to these TSI engines generates more heat to disperse.  Significantly increased oil temperatures means only one thing: a decrease in the ability for your engine to stay properly lubricated. At the same time, it's really important not to over-cool the oil; our 10-row kit is perfect.

Cool Runnings - The higher your power, the harder you drive, the more important it is to protect your oil.

Why Fit An Oil Cooler Kit?

  • Under hard driving, the stock oil cooler is easily overwhelmed. Failures start to occur when oil cannot dissipate its collected heat fast enough and the oil begins to thin and degrade - losing its lubrication properties.
  • The RacingLine kit solves this problem: by adding in an additional air to oil cooler positioned right in the airflow in the front of the car, oil temperatures are reduced by around 15  - 20   degrees centigrade (of course dependant on how the car is being used, ambient temps and state of tune).
  • Our kit retains the factory oil to water cooler and adds to it with the front-mounted cooler - doubling up your cooling capability with less heat transfer into the water system.
  • As the oil moves away from the heat inside the engine, its temperature drops significantly as it is pumped through the densely packed fins of the 10-row cooler’s large surface area mounted right in the cool airflow.
  • Supplied as a complete kit with every part ready for straightforward install.

Features:

  • High-efficiency Cooler
    • Our 10-row stacked plate design efficiently forces the hot oil through a series of aluminum pressed plates. Heat dissipates as cold air moves across the plates.
  • Pressure Control
    • Our unique sandwich plate oil take-off includes a clever internal pressure-control valve control to direct oil flow through the cooler at correct flow/volume.
  • Precision Machined
    • Precision machined billet components utilizing the latest 5 Axis CNC machines for perfect accuracy, first time, every time.
  • 210 Series Braided Hose
    • Our oil lines feature an attractive outer nylon braid strengthened by a stainless steel inner weave for maximum resilience.
  • Cold Air Location
    • The front-mount location brackets of the RacingLine cooler kit places it in the optimum airflow and ensures that oil temperature drops and excess heat is funneled out efficiently.
  • High-flow Filter
    • The kit includes a pretty special high-flowing oil filter. Made from stainless steel micronic filter cloth with magnetic pre-filtering, capable of flowing 5x more oil than the factory paper filter.

Oil Cooler Fitment

As you’d expect, the RacingLine Oil Cooler is a beautifully detailed complete kit, developed exclusively for the EA888.3 engine.
 
The system is designed for straightforward fitting and ultimate reliability. Everything needed for perfect fitment is included. 
  • Unlike some oil cooler kits, with the RacingLine Performance kit there is no need to remove the intake manifold to access oil galleries for a feed in and out of the engine.
  • Our clever oil filter adapter enables the oil cooler sandwich plate to be installed underneath the current oil filter housing on all EA888.3 engines - just screw off and replace.
  • This sandwich plate includes an integral pressure relief valving system to protect the system from pressure spikes.
  • 10-row stacked-plate oil cooler radiator, flowed to obtain maximum heat dissipation without undue pressure drop.
  • Optimum front mounted location behind front lower grill aperture with all necessary brackets and fixing kit supplied.
  • 210 Series stainless steel, nylon braided feed and return lines run past the chassis leg into the bumper cavity, then connecting to the oil cooler core.

Precision Engineered For Perfect Performance.

  • Left-hand threaded oil filter housing top for easy (and clean) oil changes
  • Stainless steel micronic high-flow filter included in each kit. Supplied separately for oil changes
  • T6 6061 CNC aluminum used throughout for precision accurate fit
  • Billet gloss-anodized for long-lasting protection and good looks
  • Adaptor plate locates under oil filter with pressure-control valving to divert oil flow around new cooling system
The Oil Filter
The Oil Cooler Kit includes a pretty special oil filter. The filter element is made from high-flow stainless steel micronic filter cloth – a medical grade material guaranteed to filter out oil contamination better than paper-based filters, all helping to avoid the risk of resultant engine damage. 
  • 5 times the flow of comparable paper oil filters
  • Consistent filtering across entire filter surface
  • Magnetic prefiltering to remove microscopic ferrous materials before they reach the filter itself
The filter itself is available separately from all RacingLine dealers for servicing. Whilst this filter has a much longer service life than the factory paper elements do, we recommend as best-practice to change filter with every oil change. Replacement Filter can be purchased here: Racingline Oil Filter Replacement - VWR180001

So What's In The Kit?

  • AN10 210 series Nylon braided feed and return line.
  • Oil cooler mounting brackets (two sets)
  • Billet CNC non-return sandwich plate.
  • Billet oil filter housing with a removable drop in filter.
  • AN10 10-row oil cooler core.
  • Fitting kit containing all necessary nuts, bolts, washers and rubber mounting bobbins.

Fitment (Non-EU Models - For U.S. Market and ROW):

  • VW Golf 7 GTI 2015+ 5G
  • VW Golf 7 R 2015+ 5G
  • VW Golf 7 GTI ClubSport 2016+ 5G
  • VW Passat 2.0 TSI B8 2016+ 3G
  • VW Arteon 2.0 TSI 2018+
  • Audi S3 2015+ 8V
  • Audi TT 2.0 TSI III 2017+ 8S
  • Audi TTS III 2017+ 8S

Fitment Note: 2015 and older cars may also require fitment of VWG part 06L115678Q (a plastic oil stem insert). This is a running upgrade from VWG dealers so most cars will have had this part updated during earlier oil changes.

 

Customer feedback

There have been no reviews


Send to friend

: *
: *
: *
 
Select Your Vehicle
8.00# 14.00x14.00x8.00

Racingline VWR Oil Cooler Kit For VW & Audi MQB Platform

Fits MK7/MK7.5 GTI/Golf R/B8 Passat/Arteon & Audi 8V A3/S3

Read Full Description
Brand: 
$595.00
MFG# VWR18G700
SKU# 26402
 Ships Today 
This item is in stock and will usually ship same day if ordered by 4PM EST.
Free shipping
QTY:

 Recommended by the experts!

Add Racingline VWR Oil Cooler Replacement Filter
  • Full description
  • Cars This Fits ...

  • Make Model Year Engine
    Audi TTS MK3 (2016+) 2.0T
    Audi TT MK3 (2016+) 2.0T
    Audi S3 2015-2017 (8V) 2.0T
    Audi S3 2018-2019 (8V2) 2.0T
    Audi A3 2014-2016 (8V) 1.8 TSI
    Audi A3 2014-2016 (8V) 2.0 TSI (FWD)
    Audi A3 2014-2016 (8V) 2.0 TSI (Quattro)
    Audi A3 2017-2019 (8V2) 2.0 TSI (FWD)
    Audi A3 2017-2019 (8V2) 2.0 TSI (Quattro)
    Volkswagen Passat B8 (2016+) 1.8T Gen 3
    Volkswagen Golf/GTI/Rabbit MK7 (2015-2017) 1.8T
    Volkswagen Golf/GTI/Rabbit MK7 (2015-2017) 2.0T
    Volkswagen Golf/GTI/Rabbit MK7.5 (Facelift 2018+) 2.0T
    Volkswagen Arteon 2019+ 2.0T TSI
    Volkswagen .:R Models MK7 R (2015-2017) 2.0T
    Volkswagen .:R Models MK7.5 R (Facelift 2018+) 2.0T