Home » Engine » Mounts » APR Subframe Insert Kit For MQB Late
Product description

APR Subframe Insert Kit - MQB Late (Version 2)

APR Billet Stainless-Steel Dogbone / Subframe Mount Insert mount. 
 
The APR Billet Stainless-Steel Dogbone / Subframe Mount Insert limits driveline movement, which helps to minimize wheel-hop and torque steer. This provides a more direct driving experience by eliminating slop in the driveline and does so without introducing excessive or uncomfortable driveline vibration and noise.
 
The APR insert is created from thick, billet, stainless-steel. All mounts will slightly deform under use, but unlike all other units created from rubber, polyurethane, and even billet-aluminum, the APR unit will not heavily deform to the point of failure. Rest assured this simple upgrade will pass the test of time, unlike others, and packs a limited lifetime warranty against cracking!
 
We offer the mount in two different configurations depending on the style of your factory mount. Be sure to check your subframe mount before purchase, and remember to always replace your factory 1-time use subframe bolt! 
 
What version is your vehicle's subrame? See below: 
 
MS100142 - (Version 2) - Click Add to Cart if you have this version
 

Customer feedback

Alltack_in_socal
Jan 24, 2019
I bought this unit because the spulen dog bone bushing insert was tough to get installed on an Alltrack. Make sure you purchase the right version, mine was v2 that looks like a triangle. I originally had a GTI, and had the neuspeed insert and I noticed there is a lot more vibration on this. With that being said it was a fairly straight forward install. The only thing I would say is make sure you push the engine towards the rear because the hole that the stretch bolt goes into will move towards the front. To line them up use a screwdriver or 3/8 ratchet extension to line up and force the engine towards the rear. With my left hand I held position engine forward and got the bolt to catch. Torqued it down to 75lbs.

My shifts in my MT6 are super smooth now. There is a more vibration but you can feel the engine a lot better and there is no jerkiness in the car. I set this up because I am doing the APR Stage 1 next and several shops indicate that a dog bone insert or this will stop wheel hop for any GTI/golf mk7 variant. This paired with my GFB DVI+ and Spulen Short shift kit (all from USP motorsports) make it almost comparable to a GTI but I can go off-road now!

Advantages: Super smooth shifts
More in touch feeling with engine
Easy install
Better than the dog bone inserts
Bang for the buck
No jerkiness

Disadvantages: Vibration (some will not like it)
Loading...Was the above review useful to you? Yes (0) / No (0)

Send to friend

: *
: *
: *
 
Select Your Vehicle
2.00# 9.00x7.00x5.00

APR Subframe Insert Kit For MQB Late

Minimize Wheel-hop And Torque Steer
 
 
(1 reviews)

Verify your Subframe Before Purchase
Read Full Description
Brand: 
$59.99
MFG# MS100142
SKU# 20566
 In Stock 
This item is in stock and will ship within 1 business day
Free shipping
QTY:

 Recommended by the experts!

Add APR Dogbone Mount Kit For MQB
  • Full description
  • Cars This Fits ...

  • Make Model Year Engine
    Audi TTS MK3 (2016+) 2.0T
    Audi TTRS MK3 (2018+) 2.5 TFSI
    Audi TT MK3 (2016+) 2.0T
    Audi S3 2015-2017 (8V) 2.0T
    Audi S3 2018-2019 (8V2) 2.0T
    Audi RS3 2017+ 8V 2.5 TFSI
    Audi A3 2014-2016 (8V) 1.8 TSI
    Audi A3 2014-2016 (8V) 2.0 TSI (FWD)
    Audi A3 2014-2016 (8V) 2.0 TSI (Quattro)
    Audi A3 2017-2019 (8V2) 2.0 TSI (FWD)
    Audi A3 2017-2019 (8V2) 2.0 TSI (Quattro)
    Volkswagen Tiguan (2018+ MQB) 2.0T Gen 3
    Volkswagen Passat B8 (2016+) 1.8T Gen 3
    Volkswagen Golf/GTI/Rabbit MK7 (2015-2017) 1.8T
    Volkswagen Golf/GTI/Rabbit MK7 (2015-2017) 2.0T
    Volkswagen Golf/GTI/Rabbit MK7 Sportwagen (2015+) 1.8T
    Volkswagen Golf/GTI/Rabbit MK7.5 (Facelift 2018+) 2.0T
    Volkswagen Alltrack 2016+ 1.8T Gen 3
    Volkswagen .:R Models MK7 R (2015-2017) 2.0T