Home » Engine » Fueling » APR FSI High Pressure Fuel Pump (New)
Product description
Having fuel cuts / sputtering in the upper RPM range on your modified 2.0T FSI? The stock high pressure rail pump is most likely the culprit. Modification of the 2.0T FSI engine far beyond OEM power levels requires an additional volume of high-pressure fuel especially in the midrange (3000-5000rpm) of the powerband. To understand why this fuel is needed for the midrange, one must first understand how the fuel delivery system works in the 2.0T FSI.
 
APR High Pressure Fuel Pump Internal Parts
A low pressure fuel pump, which varies from ~40-95psi, delivers fuel from the gas tank to the high pressure fuel pump. Then the high pressure, camshaft driven pump pressurizes the fuel to upwards of 130bar (almost 1900psi!) in order to spray fuel directly into the combustion chamber. Unfortunately on cars that have many modifications, the stock fuel pump cannot flow enough volume of fuel to maintain the system pressure and the car suffers from the familiar "fuel cut" that so many modified customers experience.
The limitation of how much volume of fuel the high pressure pump can flow is dependent upon the volume displaced by the pressurizing cylinder inside the pump and the number of times the piston reciprocates inside that cylinder. Since the high pressure pump is driven off of the engine camshaft by a three lobe cam the piston of the pump cycles at 1.5 times the engine rpm. (Engine camshaft turns at one-half engine rpm multiplied by three for the number of lobes on the high pressure cam lobe).
Due to this dependency on engine rpm for the high pressure fuel pump output volume, the FSI pump is capable of flowing almost 370hp at 7000 rpm but only 158hp at 3000rpm. The graph below illustrates the maximum horsepower potential of the stock fuel pump compared to the APR FSI fuel pump. Also on the graph are stock and APR Stage III horsepower numbers. Clearly, the stock pump is insufficient for the output generated by this upgraded kit. The only way to address this issue while maintaining a pump that fits in the stock location is to change the volume of the pump's internal pressurization chamber.

 

Fuel Pump Potential
In order to address the lack of fuel in the midrange, the APR FSI fuel pump increases the volume of fuel from the high pressure pump by over 40%. Simplified, this is achieved by modifying some key internal parts within the pump. Changing these components requires precision machining of the new components with special surface treatments as well as enlarged, redesigned seals. Using inferior components on this critical part can lead to many problems from gasoline in the engine oil (from a bad seal) to complete engine failure (from a seized piston in the high pressure pump).
To give an idea of the tolerances involved, the final surface finish on the piston inside the fuel pump is so critical that it can be damaged by touching them with bare hands. The tolerances between the piston and the new barrel the piston rides in can only be measured by a multi-million dollar machine which uses air volumes to measure the part clearances to within microscopic levels.
Click to enlarge

Fuel Pump Components
The components used in the APR pump are also of a high caliber. The piston and barrel of the new pump are made of a certified and heat-treated bearing-grade stainless steel and have a special diamond like coating. The seals used in the pump are made of a high performance, filled polymer with a high modulus spring to retain the seal forces throughout the life of the product. The cross section of the seal is also of a proprietary design to maintain integrity over many years of use.
APR FSI pumps have been track tested since 2006 with several hundreds of thousands of miles of combined usage. Each APR pump starts out as a brand new OEM pump and is then modified with the new components by APR and undergoes a rigorous testing process on our high pressure fuel pump tester. Once a pump passes our standards it is serialized and shipped to the customer.
Click to enlarge

Motorsports Development

When it comes to a critical component that can mean the difference between winning a race and not finishing at all, motorsport teams must use the best components available. Motorsport teams around the world have put the APR High Pressure Fuel Pump though brutal and demanding testing and have proven again and again the reliability and performance you can expect from each and every APR High Pressure Fuel Pump. The initial success of the R-GTI and APR's own motorsport team have lead other noteworthy teams around the world to rely on APR.

Beginning in 2007, APR Motorsport brutally tested the FSI High Pressure Fuel Pump for thousands of miles at high stress levels. All three race cars successfully completeted their first seasons without a single issue from the APR High Pressure Fuel Pump. The team continues to put each pump though the same brutal testing race after race.

Disclaimer: Due to our dealer agreement, this product can not be shipped internationally 

 

Due to our dealer agreement, APR products cannot be shipped outside of the United States.

Customer feedback

There have been no reviews


Send to friend

: *
: *
: *
 
Select Your Vehicle
4.00# 9.00x7.00x5.00

APR FSI High Pressure Fuel Pump (New)


Read Full Description
Brand: 
$849.99
MFG# MS100016
SKU# 242
Free shipping
QTY:

  • Full description
  • Cars This Fits ...

  • Make Model Year Engine
    Audi TTS MK2 (2009-2015) 2.0T FSI
    Audi TT MK2 (2008-2015) 2.0T FSI
    Audi A4 B7 (05.5-2008) 2.0T FSI (FWD)
    Audi A4 B7 (05.5-2008) 2.0T FSI (Quattro)
    Audi A3 2005-2013 (8P) 2.0T FSI
    Volkswagen Passat B6 (06-2011) n/a
    Volkswagen Jetta MK5 (05.5-2010) 2.0T FSI
    Volkswagen Golf/GTI/Rabbit MK5 (06-2009) 2.0T FSI
    Volkswagen Eos ALL 2.0T FSI
    Volkswagen .:R Models MK6 R (2012-2013) 2.0T FSI