Racingline Lower Engine Mount 2.0TSI (MQB / MQB 'Evo')

Get your power to the road or track where you need it from the RacingLine Engine Mounts. OK, these Mounts aren't the most visible or sexy of modifications. But for those in the know, with high-power cars or who use their car regularly on track, our Uprated Engine Mount Set is truly one of the most worthwhile upgrades to the driving dynamics of their car. Suitable for either DSG or manual cars.

The Uprated Full Set of Engine Mount stiffens the whole location of the drivetrain greatly to give a much tighter, sharper feeling to your car. It removes the loose feeling when coming on and off-throttle during aggressive gearchanges, and banishes wheel-hop under hard acceleration as the whole engine and 'box assembly judders.

This adds strength to the drivetrain, helping to protect from future wear and breakages. Rather than some aftermarket 'push in' bushes which crudely fill the voids in the original factory mounts, the RacingLine mounts are a completely redesigned replacement mount assembly and torque link. 

What Do They Do? 

To harness your power increases, and transfer that power to the track where you need it, our Uprated Drivetrain Mounts will give a much more solid drive, and crucially add durability to any high-powered or hard-driven car. The whole engine and gearbox (the drivetrain) is located in just three places. The two upper mounts support the entire weight of the engine/gearbox, plus a third Lower Mount underneath the engine.   

Our Uprated Drivetrain Mounts are a CNC-machined, fully engineered replacement set of three mounts designed to greatly decrease engine and transmission movement, ensuring clean transfer of power to the track. The risk of wheel-hop under hard acceleration is almost eliminated as the whole engine and 'box assembly is firmly prevented from juddering when wheelspin occurs and through aggressive gearchages. 

Transform The Drive:

Transform the drive through eliminating wheel-hop off the line and through aggressive gearchanges.

Extensive Development:

Careful development of the durometer (stiffness) rating of the polymer used, meaning less compromise on NVH.

Add Strength:

Essential upgrade for modified cars to keep the drivetrain properly located.

Lower Mount/MQB Dogbone: 

For road cars, we recommend just the Uprated Lower Engine Mount for the perfect compromise. MQB-platform Lower Mount kit includes a billet aluminium Torque Link, as the factory pressed steel part lacks the stiffness needed.

Matched Set:

High-powered, track or hard-driven cars, should have the full Uprated Mount Set as the ultimate choice.

Make no mistake, the full uprated engine mount kit is a relatively extreme modification to make to your car. Naturally, more noise from the drivetrain comes into the cabin (and more than when the Lower Engine Mount only is fitted), but most keen drivers love the sense that they are more 'connected' to their car, and the gentle 'growl' that the mount conveys.  Allow a few hundred miles/kms of driving for the mount to settle in after installation.